Question Details

Assuming the material considered in each statement is homogeneous, isotropic, linear elastic, and the deformations are in the elastic range, which one or more of the following statement(s) is/are TRUE?

Options

A

A body subjected to hydrostatic pressure has no shear stress

B

If a long solid steel rod is subjected to tensile load, then its volume increases

C

Maximum shear stress theory is suitable for failure analysis of brittle materials

D

If a portion of a beam has zero shear force, then the corresponding portion of the elastic curve of the beam is always straight

Show Answer
Correct Answer

Solution :

The correct statement(s) are:
"A body subjected to hydrostatic pressure has no shear stress"
"If a long solid steel rod is subjected to tensile load, then its volume increases"

Let us evaluate each of the statements in detail:

1. Analysis of Statement: "A body subjected to hydrostatic pressure has no shear stress" (TRUE)
Under hydrostatic loading, a body is subjected to equal compressive stress in all directions. The state of stress at any point in the body is given by:

σx = σy = σz = − p

where p is the hydrostatic pressure, and the shear stress components are zero:

τxy = τyz = τzx = 0

The maximum shear stress on any plane is determined using the principal stresses:

τmax = σmax − σmin 2

Since σmax=σmin=−p, we have:

τmax = − p − ( − p ) 2 = 0

Hence, there is no shear stress on any plane within the body. Thus, this statement is TRUE.

2. Analysis of Statement: "If a long solid steel rod is subjected to tensile load, then its volume increases" (TRUE)
When a solid rod is subjected to a uniaxial tensile load along its longitudinal axis (say, the x-axis), the stress components are:

σx > 0  (tensile stress), and  σy = σz = 0

The volumetric strain εv, which represents the fractional change in volume, is given by the sum of the linear strains in three perpendicular directions:

εv = dV V = εx + εy + εz

Using Hooke's law in terms of Young's modulus (E) and Poisson's ratio (ν):

εx = σxE

εy = − ν σxE

εz = − ν σxE

Substituting these into the volumetric strain equation:

εv = σxE − ν σxE − ν σxE = σxE ( 1 − 2 ν )

For steel, Poisson's ratio ν typically ranges between 0.27 and 0.30. Since ν<0.5, the factor (1−2ν) is positive. Since σx>0 under tension, the volumetric strain εv is greater than zero (εv>0), indicating that the volume increases. Thus, this statement is TRUE.

3. Analysis of Statement: "Maximum shear stress theory is suitable for failure analysis of brittle materials" (FALSE)
The Maximum Shear Stress Theory (also known as Tresca's yield criterion) is used for ductile materials, which primarily fail in shear. Brittle materials, on the other hand, are weak in tension and fail due to normal tensile stress. Therefore, the Maximum Principal Stress Theory (Rankine's theory) is suitable for brittle materials. Thus, this statement is FALSE.

4. Analysis of Statement: "If a portion of a beam has zero shear force, then the corresponding portion of the elastic curve of the beam is always straight" (FALSE)
The relationship between shear force (V) and bending moment (M) along a beam is:

V = dM dx

If the shear force is zero over a portion of the beam, it implies that the bending moment in that region is constant (M=constant). The curvature of the elastic curve of the beam is defined by the Euler-Bernoulli equation:

E I d2 y d x2 = M

If the constant bending moment M is non-zero (pure bending), the curvature d2ydx2 is constant and non-zero, representing a circular arc rather than a straight line. The elastic curve is straight only if both shear force and bending moment are zero in that section. Thus, this statement is FALSE.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • UPSC
  • intermediate
  • 2 hours
  • data interpretation (di), logical reasoning

Prepare effectively for the UPSC Civil Services Examination with the UPSC Prelims 2016 Paper 2 (CSAT) Question Paper with Detailed Solutions. This paper includes all original CSAT questions from the UPSC Prelims 2016 examination along with step-by-step explanations, answer keys, and shortcut techniques.The UPSC CSAT paper tests candidates on Comprehension, Logical Reasoning, Analytical Ability, Decision Making, Basic Numeracy, Data Interpretation, and Mental Ability. Solving previous year question papers is one of the best ways to understand the exam pattern, improve accuracy, and enhance time management skills.

  • UPSC
  • intermediate
  • 2 hours
  • current affairs, general knowledge, history, political science

A comprehensive UPSC Prelims 2015 Paper 1 (General Studies) designed to help aspirants understand the examination pattern and strengthen their preparation for the Civil Services Examination. This paper covers important areas including History, Geography, Indian Polity, Economy, Environment and Ecology, Science and Technology, Current Affairs, and International Relations. It features a balanced mix of conceptual and application-based multiple-choice questions to enhance analytical ability, accuracy, and time management. Based on previous year trends and the UPSC examination pattern, this paper is ideal for practice, revision, self-assessment, concept reinforcement, and final preparation for the UPSC Civil Services Preliminary Examination.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: