Question Details

A four bar mechanism is shown below. For the mechanism to be a crank-rocker mechanism, the length of the link PQ can be

Options

A

80 mm

B

200 mm

C

300 mm

D

350 mm

Show Answer
Correct Answer
A 80 mm

Solution :

The correct answer is 80 mm.

To determine the length of the link PQ for the four-bar linkage to behave as a crank-rocker mechanism, we must apply Grashof's Law. Grashof's Law states that for a planar four-bar linkage, a continuous relative motion between the links is possible if the sum of the lengths of the shortest and longest links is less than or equal to the sum of the lengths of the other two remaining links.

Mathematically, the Grashof criterion is represented as:
s + l ≤ p + q
where:
• s is the length of the shortest link.
• l is the length of the longest link.
• p and q are the lengths of the remaining two links.

Based on the provided mechanism diagram (Image 0):
• The fixed/grounded link is PS, with a length of LPS=400 mm.
• The coupler link is QR, with a length of LQR=600 mm.
• The rocker/output link is RS, with a length of LRS=300 mm.
• The input link is PQ, whose length LPQ is to be found.

For a four-bar mechanism to be a crank-rocker mechanism, the link adjacent to the fixed link must act as a fully rotating crank. This condition is met when the mechanism satisfies the Grashof criterion and the shortest link (s) is adjacent to the fixed link (or acts as the crank itself).

Assuming the link PQ is the shortest link (s=LPQ) and is adjacent to the fixed link PS:
• Shortest link length, s=LPQ
• Longest link length, l=600 mm
• Other two link lengths, p=300 mm and q=400 mm

Substituting these values into the Grashof inequality:
LPQ + 600 ≤ 300 + 400
LPQ + 600 ≤ 700
LPQ ≤ 100 mm

Among the given choices (80 mm, 200 mm, 300 mm, and 350 mm), the only length that is less than or equal to 100 mm is 80 mm.

Let's verify with LPQ=80 mm:
• s=80 mm (shortest link)
• l=600 mm (longest link)
• s+l=80+600=680 mm
• p+q=300+400=700 mm
Since 680≤700, the Grashof criterion is satisfied. Furthermore, because the shortest link PQ is adjacent to the fixed ground link PS, it is capable of full rotation (acting as a crank), while the opposite grounded link RS oscillates (acting as a rocker). Therefore, the system is a valid crank-rocker mechanism.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: