Question Details

A gas is heated in a duct as it flows over a resistance heater. Consider a 101 kW electric heating system. The gas enters the heating section of the duct at 100 kPa and 27°C with a volume flow rate of 15 m3/s. If heat is lost from the gas in the duct to the surroundings at a rate of 51 kW, the exit temperature of the gas is (Assume constant pressure, ideal gas, negligible change in kinetic and potential energies and constant specific heat; Cp = 1 kJ/kgK; R = 0.5 kJ/kgK)

Options

A

32°C

B

37°C

C

76°C

D

53°C

Show Answer
Correct Answer

Solution :

The correct answer is 32°C.

1. Identify the given parameters from the problem description and the schematic diagram:
• Power input to the electric resistance heater: W ˙ in = 101  kW (labeled as W = 101 kW in the diagram)
• Rate of heat lost to the surroundings: Q ˙ loss = 51  kW (labeled as Qloss = 51 kW in the diagram)
• Inlet gas pressure: P 1 = 100  kPa
• Inlet gas temperature: T 1 = 27 °C = 300  K (Note: The label on the schematic diagram contains a typo showing T1 = 200 K, but the calculation correctly uses the given value of 300 K)
• Gas volume flow rate at the inlet: V ˙ 1 = 15  m 3 /s
• Specific heat at constant pressure: C p = 1  kJ/(kg ⋅ K)
• Gas constant: R = 0.5  kJ/(kg ⋅ K)

2. Calculate the mass flow rate (m˙) using the ideal gas equation of state at the inlet:
Using the equation:
P 1 V ˙ 1 = m ˙ R T 1
Rearranging for mass flow rate (m˙):
m ˙ = <{{ "P" }}_{1} V ˙ 1 R T 1
Substituting the given values:
m ˙ = 100 × 15 0.5 × 300 = 1500 150 = 10  kg/s

3. Apply the Steady Flow Energy Equation (SFEE) to the control volume:
Since changes in kinetic and potential energies are negligible, the energy balance equation is:
m ˙ h 1 + W ˙ in = m ˙ h 2 + Q ˙ loss
Rearranging to solve for the enthalpy change:
W ˙ in - Q ˙ loss = m ˙ ( h 2 - h 1 )
Since the specific heat capacity at constant pressure is constant, we can express the change in specific enthalpy as h 2 - h 1 = C p ( T 2 - T 1 ) :
W ˙ in - Q ˙ loss = m ˙ C p ( T 2 - T 1 )

4. Solve for the temperature difference:
101 - 51 = 10 × 1 × ( T 2 - T 1 )
50 = 10 × ( T 2 - T 1 )
T 2 - T 1 = 5  K (or 5°C)

5. Find the final exit temperature of the gas:
T 2 = T 1 + 5 °C = 27 °C + 5 °C = 32 °C

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: