Question Details

A machine of mass 100 kg is subjected to an external harmonic force with a frequency of 40 rad/s. The designer decides to mount the machine on an isolator to reduce the force transmitted to the foundation. The isolator can be considered as a combination of stiffness (K) and damper (damping factor, ζ) in parallel. The designer has the following four isolators :

1) k = 640 kN/m, ζ = 0.70

2) k = 640 kN/m, ζ = 0.07

3) k = 22.5 kN/m, ζ = 0.70

4) k = 22.5 kN/m, ζ = 0.07

Arrange the isolators in the ascending order of the force transmitted to the foundation.

Options

A

1-3-4-2

B

1-3-2-4

C

4-3-1-2

D

4-3-1-2

Show Answer
Correct Answer

Solution :

The correct option is "4-3-1-2".

1. Understanding Transmissibility and the System Parameters
The force transmitted to the foundation depends on the transmissibility ratio (ε), defined as the ratio of the transmitted force (Ft) to the excitation force (F0). The transmissibility ratio is given by:

ε = Ft F0 = 1 + 2ζr 2 1-r2 2 + 2ζr 2

where:
• ζ is the damping ratio (damping factor),
• r is the frequency ratio, defined as r=ωωn, with excitation frequency ω=40 rad/s and natural frequency ωn=km (for a mass m=100 kg).

2. Calculating the Frequency Ratio (r) for the Two Stiffness Values
From the analysis in the provided diagram, we compute the parameters for the two stiffness settings:

Case A: For k=640 kN/m=640,000 N/m (Isolators 1 and 2):

ωn = 640,000 100 = 80  rad/s

r = 40 80 = 0.5

Since r=0.5<2, these isolators operate in the region below the crossover point.

Case B: For k=22.5 kN/m=22,500 N/m (Isolators 3 and 4):

ωn = 22,500 100 = 15  rad/s

r = 40 15 ≈ 2.667

Since r≈2.667>2, these isolators operate in the isolation region above the crossover point.

3. Analyzing Transmissibility Curves from the Diagram
As shown in the plotted graph of transmissibility (ε) versus frequency ratio (r):
• For r<2: The transmissibility is greater than 1 (ε>1). In this region, increasing the damping factor (ζ) decreases the transmissibility. Comparing Isolator 1 (ζ=0.70) and Isolator 2 (ζ=0.07):

ε1 < ε2

• For r>2: The transmissibility is less than 1 (ε<1). In this isolation region, increasing the damping factor (ζ) actually increases the transmissibility. Comparing Isolator 3 (ζ=0.70) and Isolator 4 (ζ=0.07):

ε4 < ε3

4. Establishing the Ascending Order
Since the transmissibility values for the isolation region (r>2) are less than 1, and the values for the region (r<2) are greater than 1, we can order the transmissibility values directly:

ε4 < ε3 < 1 < ε1 < ε2

Thus, the ascending order of the force transmitted to the foundation is:
4 - 3 - 1 - 2

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: