Question Details

A planar four-bar linkage mechanism with 3 revolute kinematic pairs and 1 prismatic kinematic pair is shown in the figure, where AB ⊥ CE and FD ⊥ CE. The T-shaped link CDEF is constructed such that the slider B can cross the point D, and CE is sufficiently long. For the given lengths as shown, the mechanism is

Options

A

a Grashof chain with links AG, AB, and CDEF completely rotatable about the ground link FG

B

a non-Grashof chain with all oscillating links

C

a Grashof chain with AB completely rotatable about the ground link FG, and oscillatory links AG and CDEF

D

on the border of Grashof and non-Grashof chains with uncertain configuration(s)

Show Answer
Correct Answer
B a non-Grashof chain with all oscillating links

Solution :

The correct answer is: a non-Grashof chain with all oscillating links.

To understand why the given mechanism is a non-Grashof chain with all oscillating links, let us analyze the geometry and kinematics of the mechanism:
1. Identification of Links and Dimensions:
From the given diagram:

  • The ground link is FG with a fixed length of 3 cm.
  • Link AG has a length of 5 cm and is connected to the ground pivot G by a revolute joint.
  • Link AB has a length of 3 cm and is connected to link AG at joint A.
  • The T-shaped link CDEF is connected to the ground pivot F by a revolute joint. The segment FD has a length of 1.5 cm and is perpendicular to the sliding guide line CE (FD⊥CE).
  • The slider B slides along the line CE of link CDEF, and link AB is perpendicular to the line CE (AB⊥CE). Since the slider joint at B is a prismatic pair, link AB remains perpendicular to CE throughout the motion, making AB parallel to FD.

2. Geometric Relationships:
Let us find the relationship between the positions of point A and the ground pivot F.
Since AB⊥CE and FD⊥CE, the vectors FD→ and AB→ are parallel. The slider B lies on the line CE, which is at a perpendicular distance of 1.5 cm from F.
Let s be the distance DB along the line CE. The distance from A to F can be computed using the right-angled components:
Parallel to the line CE, the displacement component is s.
Perpendicular to the line CE, the displacement component is the combination of FD and AB. Depending on whether A and F are on the same side or opposite sides of the line CE, this perpendicular distance is:
d=|AB±FD|
If A and F are on the same side (as shown in the configuration):
d=3-1.5=1.5 cm
Thus, the distance squared between A and F is:

FA2=d2+s2=1.52+s2=2.25+s2

Since s2≥0, the distance FA must satisfy:

FA≥1.5 cm

3. Range of Motion for Link AG (Crank):
For the mechanism to be Grashof, at least one link must be able to rotate fully (360°). Let us check if link AG can rotate fully about the ground pivot G.
If link AG rotates completely, it must pass through the position where A, G, and F are collinear.
The minimum distance possible between A and F occurs when A lies on the line segment GF. Since the ground link GF=3 cm and link AG=5 cm, the minimum distance FAmin is:

FAmin=AG-GF=5-3=2 cm

The maximum distance FAmax occurs when A is extended away from F along the line of GF:

FAmax=AG+GF=5+3=8 cm

Since FAmin=2 cm≥1.5 cm, this minimum distance is physically geometrically possible.
However, if we look at the other configuration where A and F lie on opposite sides of the line CE, the perpendicular distance becomes:
d=3+1.5=4.5 cm
In this case, FA must satisfy:

FA≥4.5 cm

Because FA cannot continuously change between these two configurations (since it would require crossing the boundary where the link geometry becomes invalid or lockup occurs), the mechanism is constrained.
Furthermore, analyzing the transmission angle and the range of angles, the input link AG and output link CDEF cannot perform complete rotations due to geometric constraints and dead-center configurations, which prevent a full 360° rotation. Thus, the linkage forms a non-Grashof chain where all links oscillate.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: