Question Details

A plane-strain compression (forging) of a block is shown in the figure. The strain in the z-direction is zero. The yield strength (Sy ) in uniaxial tension/compression of the material of the block is 300 MPa and it follows the Tresca (maximum shear stress) criterion. Assume that the entire block has started yielding. At a point where σx = 40 MPa (compressive) and τxy = 0, the stress component σy is

                                                              


Options

A

340 MPa (compressive)

B

340 MPa (tensile)

C

260 MPa (compressive)

D

260 MPa (tensile)

Show Answer
Correct Answer

Solution :

The correct answer is 340 MPa (compressive).

1. Understanding the Physical Setup and Coordinates
From the provided image, the block is being compressed along the vertical y-axis by a downward-moving platen against a fixed bottom platen. The horizontal axis is denoted as x, and the longitudinal axis (out of the page) is z.

2. Applying the Plane-Strain Condition
Under plane-strain forging conditions, the strain in the longitudinal direction is zero:
εz=0
For plastic flow under plane strain, the normal stress in the direction of zero strain is the average of the other two normal stresses:
σz=σx+σy2
Since σz is the exact average of σx and σy, it serves as the intermediate principal stress (σ2). Given that the shear stress τxy=0, the normal stresses σx and σy are the principal stresses in their respective directions.

3. Determining Principal Stress Order
Because the block is actively compressed by the moving platen along the y-axis, the compressive stress in the vertical direction (σy) will be greater in magnitude (more negative) than the compressive stress in the lateral direction (σx). Thus:
σx>σz>σy
Therefore, the maximum principal stress is σmax=σx and the minimum principal stress is σmin=σy.

4. Yielding and the Tresca Criterion
According to the Tresca (maximum shear stress) criterion, yielding occurs when:
σmax-σmin=Sy
Substituting the principal stresses into the criterion:
σx-σy=Sy
We are given:
• Sy=300 MPa
• σx=-40 MPa (compressive)
Substituting these values:
-40-σy=300
σy=-40-300=-340 MPa
Since the result is negative, σy is compressive with a magnitude of 340 MPa.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: