Question Details

A power transmission mechanism consists of a belt drive and a gear train as shown in the figure.

Diameters of pulleys of belt drive and number of teeth (T) on the gears 2 to 7 are indicated in the figure. The speed and direction of rotation of gear 7, respectively, are

Options

A

255.68 rpm; clockwise

B

255.68 rpm; anticlockwise

C

575.28 rpm; clockwise

D

575.28 rpm; anticlockwise

Show Answer
Correct Answer

Solution :

The correct option is: 255.68 rpm; clockwise

Step-by-Step Derivation and Analysis:

1. Analysis of the Belt Drive:
From the given system layout, we have the driver pulley (motor shaft) with a diameter:
d 0 = 150  mm
rotating at a speed of:
N 0 = 2500  rpm (anticlockwise)
This driver pulley is connected via an open belt drive to a driven pulley of diameter:
d 1 = 250  mm
The rotational speed of the driven pulley (N1) is calculated as:
N 1 = N 0 × d 0 d 1
Substituting the given values:
N 1 = 2500 × 150 250 = 1500  rpm
Since this is an open belt drive, the driven pulley rotates in the same direction as the driver pulley (anticlockwise).
Because Gear 2 is mounted on the same shaft as this driven pulley, they share the same speed and direction:
N 2 = 1500  rpm (anticlockwise)

2. Transmission from Gear 2 to Gear 3:
Gear 2 (having teeth T2=18) meshes externally with Gear 3 (having teeth T3=44).
The rotational speed of Gear 3 (N3) is:
N 3 = N 2 × T 2 T 3
Substituting the teeth numbers:
N 3 = 1500 × 18 44 ≈ 613.636  rpm
Since Gear 2 and Gear 3 are in external contact, the direction of rotation reverses. Thus, Gear 3 rotates in the clockwise direction.

3. Transmission from Gear 4 to Gear 6:
Gear 4 is keyed to the same shaft as Gear 3, which means:
N 4 = N 3 ≈ 613.636  rpm (clockwise)
Gear 4 (having teeth T4=15) meshes with Gear 5 (T5=33), which in turn meshes with Gear 6 (having teeth T6=36).
Here, Gear 5 behaves as an idler gear, and it does not affect the overall speed ratio between Gear 4 and Gear 6. The speed of Gear 6 is given by:
N 6 = N 4 × T 4 T 6
Substituting the parameters:
N 6 = 613.636 × 15 36 ≈ 255.68  rpm

4. Determining the Final Speed and Direction of Gear 7:
Let us determine the direction of rotation through the gear sequence:
• Gear 4 rotates clockwise.
• Meshing with Gear 5 causes Gear 5 to rotate anticlockwise.
• Meshing with Gear 6 causes Gear 6 to rotate clockwise.
Since Gear 7 is mounted on the same shaft as Gear 6, it rotates at the exact same speed and direction:
N 7 = N 6 = 255.68  rpm (clockwise)

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: