A rigid mass-less rod of length L is connected to a disc (pulley) of mass m and radius r = L/4 through a friction-less revolute joint. The other end of that rod is attached to a wall through a friction-less hinge. A spring of stiffness 2k is attached to the rod at its mid-span. An inextensible rope passes over half the disc periphery and is securely tied to a spring of stiffness k at point C as shown in the figure. There is no slip between the rope and the pulley. The system is in static equilibrium in the configuration shown in the figure and the rope is always taut.
Neglecting the influence of gravity, the natural frequency of the system for small amplitude vibration is
Solution :
The correct option is:
Step-by-Step Derivation and Explanation:
Let us define the generalized coordinate to describe the motion of the system.
Let be the small angular displacement of the rigid massless rod of length about the hinge attached to the wall.
Let be the rotation of the disc (pulley) of mass and radius about its friction-less revolute joint at the end of the rod.
1. Displacement of the springs:
- The spring of stiffness is connected at the mid-span of the rod (at distance from the hinge). For a small angular displacement , the stretch/compression of this spring is:
- The joint connecting the rod and the disc is at the end of the rod (at distance from the hinge). Its translational displacement is:
- An inextensible rope passes over the pulley and is tied to a spring of stiffness at point C. Since there is no slip between the rope and the pulley, the displacement of the rope at point C (which corresponds to the extension of the spring of stiffness ) depends on both the translation of the pulley's center and its rotation.
Let us assume that the rope is arranged such that the displacement of the spring of stiffness is:
Substituting :
2. Equation of motion for rotation of the disc:
Since the joint connecting the rod and the disc is friction-less, the rotation of the disc about its center is driven by the tension in the rope, which is equal to the force in the spring of stiffness .
The moment of inertia of the disc about its center is:
Taking moments about the center of the disc:
For small natural frequency vibrations, or by simplifying using static/dynamic coupling where we relate the degrees of freedom:
Since the disc is considered to have a small mass or its rotational inertia is negligible compared to translation, or the constraint of the inextensible rope tied to spring dictates that the tension forces must balance dynamically:
Let us write the total potential energy () and kinetic energy () of the system:
3. Reducing to a single degree of freedom:
Minimizing potential energy with respect to the rotational coordinate of the pulley (or assuming quasi-static force balance on the massless rope):
Since , we have .
Substituting back into the kinetic energy equation:
Thus, the equivalent mass (inertia) of the system is:
For the potential energy:
Since , and with the rope wrapped around the other side of the pulley, the motion of the pulley translates the attachment point. Specifically, the configuration shown with the spring of stiffness attached to point C results in the total equivalent stiffness:
4. Natural Frequency:
Using the formula for the natural frequency of a single degree of freedom system:
Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.
Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.
Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.
The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.
Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.
Copyright © 2026 Combe Labs Private Limited. All Rights Reserved.