Question Details

A shaft of diameter  25 − 0.07 − 0.04 mm is assembled in a hole of diameter  25 − 0.00 + 0.02 mm. Match the allowance and limit parameter in Column I with its corresponding quantitative value in Column II for this shaft-hole assembly.

Allowance and limit parameter
(Column I)
Quantitative value
(Column II)
P.
Allowance
1.0.09 mm
Q.
Maximum clearance
2.24.96 mm
R.Maximum material limit for hole
3.0.04 mm

4.25.0 mm

Options

A

P-3, Q-1, R-4

B

P-3, Q-1, R-4

C

P-3, Q-1, R-4

D

P-3, Q-1, R-2

Show Answer
Correct Answer

Solution :

The correct option is P-3, Q-1, R-4.

Analysis of the Given Data:
Based on the problem statement and the accompanying diagram, we have a shaft-hole assembly with a basic size of 25 mm. The diagram explicitly details the tolerance zones relative to the "Reference Line" representing the basic size of 25 mm, indicating the shaft tolerance zone (labeled "Shaft" with deviations of 0.04 mm and 0.07 mm below the basic size line) and the hole tolerance zone (with a deviation of 0.02 mm above the reference line).
Let us calculate the limits of sizes for both the shaft and the hole:

1. Shaft Limits:
Basic size of the shaft = 25 mm
Upper limit of the shaft (maximum shaft diameter):
d max = 25 − 0.04 = 24.96  mm
Lower limit of the shaft (minimum shaft diameter):
d min = 25 − 0.07 = 24.93  mm

2. Hole Limits:
Basic size of the hole = 25 mm
Upper limit of the hole (maximum hole diameter):
D max = 25 + 0.02 = 25.02  mm
Lower limit of the hole (minimum hole diameter):
D min = 25 − 0.00 = 25.00  mm

Step-by-Step Match:

P. Allowance:
Allowance is defined as the intentional difference between the maximum material limits of mating parts. For a clearance fit, it is the minimum clearance:
Allowance = Minimum Clearance = D min − d max
Substituting the values:
Allowance = 25.00 − 24.96 = 0.04  mm
Thus, P matches with 3.

Q. Maximum clearance:
Maximum clearance occurs when the hole is at its maximum limit and the shaft is at its minimum limit:
Maximum Clearance = D max − d min
Substituting the values:
Maximum Clearance = 25.02 − 24.93 = 0.09  mm
This is also visual in the diagram notes where it calculates maximum clearance as (0.07 + 0.02) = 0.09 mm.
Thus, Q matches with 1.

R. Maximum material limit for hole:
The Maximum Material Condition (MMC) for a hole corresponds to the condition where it contains the maximum amount of material (i.e., when the hole is at its smallest allowable size). Therefore:
Maximum Material Limit for Hole = D min = 25.00  mm
Thus, R matches with 4.

Conclusion:
Combining the matches, we get: P-3, Q-1, R-4.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: