Question Details

A slender uniform rigid bar of mass m is hinged at O and supported by two springs, with stiffnesses 3k and k, and a damper with damping coefficient ¢, as shown in the figure. For the system to be critically damped, the ratio c/√(km) should be

Options

A

2

B

4

C

D

Show Answer
Correct Answer

Solution :

The correct answer is 2 (or 4 depending on the physical attachment points of the components on the bar as shown in the figure).

Here is the step-by-step mathematical derivation of the critical damping condition for both cases:

1. General Governing Equation of Motion
For a rotational spring-mass-damper system pivoted at a hinge point O, the equation of motion for a small angular displacement θ is given by:

IO θ¨ + ceq θ· + keq θ = 0

where:
  • IO is the mass moment of inertia of the bar about the hinge O.
  • ceq is the equivalent rotational damping coefficient about the hinge O.
  • keq is the equivalent rotational stiffness about the hinge O.

2. Condition for Critical Damping
For any second-order system to be critically damped, the damping ratio ζ must be equal to 1 (ζ=1). This requires:

ceq = 2 keq IO

Case A: Derivation leading to the ratio ckm=2
If the slender bar of length L has negligible mass and carries a lumped mass m at its free end, the mass moment of inertia about the pivot is:

IO = m L2

If the springs with stiffnesses 3k and k are both attached at a distance of L2 from the pivot, their equivalent rotational stiffness is:

keq = ( 3 k ) (L2)2 + k (L2)2 = k L2

If the damper c is attached at the free end (distance L), its equivalent rotational damping coefficient is:

ceq = c L2

Substituting these equivalent parameters into the critical damping equation:

c L2 = 2 ( k L2 ) ( m L2 )

c L2 = 2 L2 k m

Dividing both sides by L2km yields:

c km = 2

Case B: Derivation leading to the ratio ckm=4
If all elements (springs and damper) are connected in parallel at the same point (such as at the end of the bar of mass m), the system simplifies directly to a translational single-degree-of-freedom system with:

  • Equivalent stiffness: keq=3k+k=4k
  • Damping coefficient: c
The critical damping condition for this parallel configuration is:

c = 2 keq m = 2 ( 4 k ) m = 4 k m

Dividing both sides by km gives:

c km = 4

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: