A thin-walled cylinder of radius r and thickness t is open at both ends, and fits snugly between two rigid walls under ambient conditions, as shown in the figure.
The material of the cylinder has Young's modulus E, Poisson's ratio ν, and coefficient of thermal expansion α. What is the minimum rise in temperature ΔT of the cylinder (assume uniform cylinder temperature with no buckling of the cylinder) required to prevent gas leakage if the cylinder has to store the gas at an internal pressure of p above the atmosphere?
Solution :
The correct answer is:
1. Understanding the System and the Image:
Based on the provided diagram, a thin-walled cylinder (labeled as "Pressure vessel") of radius is placed between two hatching-patterned brick structures labeled "Rigid wall" on the left and right ends. The cylinder is open at both ends and fits snugly against these walls under ambient conditions.
2. Stress Analysis:
When the cylinder is pressurized to an internal pressure above atmospheric pressure, it experiences a hoop stress (circumferential stress) due to the radial expansion tendency. For a thin-walled cylinder of radius and thickness , the hoop stress is given by:
Because the cylinder is open at both ends, there is no direct pressure force acting on the end caps to produce a tensile axial stress from the gas pressure. Thus, axial stress is only generated by the boundary constraints and thermal changes.
3. Hooke's Law and Axial Constraint:
Since the cylinder fits snugly between two rigid, unyielding walls, the total axial strain must remain zero:
Using the generalized Hooke's Law including thermal expansion, the axial strain is:
where:
- is the axial stress (taken as tensile positive),
- is Poisson's ratio,
- is Young's modulus,
- is the coefficient of thermal expansion,
- is the rise in temperature.
4. Condition to Prevent Gas Leakage:
If internal pressure is applied without any temperature increase, Poisson's effect causes the cylinder to contract axially (it wants to shrink longitudinally as it expands radially). This contraction would pull the cylinder ends away from the rigid walls, creating a gap and causing gas leakage.
To prevent gas leakage, the cylinder must stay in contact with the walls, meaning the axial stress must remain compressive (or at least zero):
The minimum temperature rise required to prevent leakage corresponds to the threshold where the cylinder just maintains contact without pulling away, i.e., when the axial stress is exactly zero:
5. Solving for Minimum Temperature Rise:
Substitute and into the strain equation:
Rearranging the terms:
Substitute the expression for hoop stress :
Solving for :
Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.
Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.
Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.
The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.
Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.
Copyright © 2026 Combe Labs Private Limited. All Rights Reserved.