Question Details

A very large metal plate of thickness 𝑑 and thermal conductivity π‘˜ is cooled by a stream of air at temperature π‘‡βˆž = 300 K with a heat transfer coefficient β„Ž, as shown in the figure. The centerline temperature of the plate is TP. In which of the following case(s) can the lumped parameter model be used to study the heat transfer in the metal plate?

Options

A

β„Ž = 10 Wm-2K -1 , k = 100 Wm-1K -1 , 𝑑 = 1 mm, TP = 350 K

B

β„Ž = 100 Wm-2K -1 , k = 100 Wm-1K -1 , 𝑑 = 1 mm, TP = 325 K

C

β„Ž = 100 Wm-2K -1 , k = 1000 Wm-1K -1 , 𝑑 = 1 mm, TP = 325 K

D

β„Ž = 1000 Wm-2K -1 , k = 1 Wm-1K -1 , 𝑑 = 1 m, TP = 350 K

Show Answer
Correct Answer

Solution :

The correct answer is:
β„Ž = 100 Wm-2K-1, k = 1000 Wm-1K-1, 𝑑 = 1 mm, TP = 325 K

1. Physical Model and Image Analysis
From the provided diagram, we observe a flat metal plate of total thickness d. The centerline of the plate is marked at temperature TP, and the distance from the centerline to either of the exposed outer surfaces is labeled as d/2.
The plate is symmetrically cooled on both the top and bottom surfaces by a stream of air at an ambient temperature of T∞ = 300 K with a convective heat transfer coefficient h, indicated by the arrows representing the air flow above and below the plate.

2. Criteria for Lumped Parameter Model
The lumped parameter model assumes that the temperature within the solid is spatially uniform at any given instant during a heat transfer process. This assumption is valid when the internal conductive resistance to heat transfer is much smaller than the external convective resistance.
The relative magnitude of these resistances is measured by the dimensionless Biot number (Bi), defined as:

B i = h L c k

where:
• h is the convective heat transfer coefficient.
• k is the thermal conductivity of the solid plate.
• Lc is the characteristic length of the solid.

The lumped parameter model can be reliably used when:

B i < 0.1

3. Calculation of Characteristic Length (Lc)
For a solid body, the characteristic length is the ratio of its volume (V) to its surface area participating in convective heat transfer (As).
For a very large metal plate of area A and thickness d cooled symmetrically from both sides, the heat transfer occurs through both the top and bottom faces:

L c = V A s = A ⋅ d 2 A = d 2

4. Verification of the Correct Option
Let us evaluate the Biot number using the parameters specified in the correct option:
• Convective heat transfer coefficient, h=100 W mβˆ’2 Kβˆ’1
• Thermal conductivity, k=1000 W mβˆ’1 Kβˆ’1
• Thickness of the plate, d=1 mm=1×10βˆ’3 m

First, compute the characteristic length:

L c = 1 ⋅ 10 − 3  m 2 = 0.5 ⋅ 10 − 3  m

Now, compute the Biot number:

B i = 100 ⋅ ( 0.5 ⋅ 10 − 3 ) 1000 = 0.05 1000 = 5 ⋅ 10 − 5

Comparing with the criterion:

5 ⋅ 10 − 5 < 0.1

Because the Biot number is significantly less than 0.1, the internal thermal resistance is negligible compared to the external convection resistance. Thus, the lumped parameter model can be applied successfully.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: