Question Details

An attempt is made to pull a roller of weight W over a curb (step) by applying a horizontal force F as shown in the figure.

The coefficient of static friction between the roller and the ground (including the edge of the step) is μ. Identify the correct free body diagram (FBD) of the roller when the roller is just about to climb over the step.

Options

A

B

C

D

Show Answer
Correct Answer
B

Solution :

The correct option is the free body diagram (FBD) that shows only the weight W acting vertically downwards from the center, the horizontal force F acting to the right from the center, and a single reaction force R at the corner of the step pointing towards the center of the roller (as represented in the diagram labeled FBD in the images).

Here is the detailed step-by-step physical breakdown of the forces acting on the roller:

1. Condition of Impending Motion (Just About to Climb)
When the horizontal force F is gradually increased, the roller tends to lift off the horizontal ground (contact point A at the bottom). At the exact instant when the roller is just about to climb over the curb/step (contact point B):
• The contact between the roller and the ground is lost.
• Therefore, both the normal reaction force N1 and the static friction force μN1 at the bottom contact surface become zero:

N1=0 and f1=0
This immediately eliminates any diagrams showing active ground reaction forces (such as N1 or μN1).

2. Concurrency of Forces in Equilibrium
Under this limiting state of equilibrium, the roller is subjected to only three forces:
• The applied pulling force F acting horizontally through the center of the roller.
• The weight of the roller W acting vertically downwards through the center of the roller.
• The reaction force R exerted by the corner of the curb (step) on the roller.

According to Lami's theorem or the three-force theorem in statics, if a body is in equilibrium under the action of three non-parallel forces, their lines of action must be concurrent (i.e., they must intersect at a single point). Since the lines of action of the weight W and the horizontal force F intersect at the center of the roller (point C), the line of action of the reaction force R at the curb's edge must also pass through the center of the roller. Hence, R is directed from the corner of the step towards the center of the roller.

Therefore, the diagram showing only F, W, and a single radial reaction force R pointing towards the center is the correct free body diagram.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: