Question Details

An epicyclic gear train is shown in the figure below. The number of teeth on the gears A, B and D are 20, 30 and 20, respectively. Gear C has 80 teeth on the inner surface and 100 teeth on the outer surface. If the carrier arm AB is fixed and the sun gear A rotates at 300 rpm in the clockwise direction, then the rpm of D in the clockwise direction is

Options

A

240

B

-240

C

375

D

-375

Show Answer
Correct Answer

Solution :

The correct option is 375.

1. Understanding the Gear Train Configuration from the Image:
Based on the provided diagram, the system consists of the following components:
• A sun gear A at the center, rotatable about a fixed axis.
• A planet gear B which meshes externally with sun gear A.
• A carrier arm AB that connects the centers of gears A and B.
• A ring gear C, which is a compound gear with internal teeth (meshing with B) and external teeth (meshing with D).
• An external gear D, which meshes externally with the outer surface of ring gear C and rotates about a fixed axis.

The number of teeth on each gear is given as:
• Teeth on gear A: TA=20
• Teeth on gear B: TB=30
• Inner teeth on gear C: TCin=80
• Outer teeth on gear C: TCout=100
• Teeth on gear D: TD=20

2. Analyzing the Motion with a Fixed Arm:
Since the carrier arm AB is fixed, the system behaves as a simple and compound gear train rather than a planetary system. We can analyze the rotation directions and speed ratios step-by-step.

Direction of Rotation:
• Let us assume the clockwise (CW) direction is positive (+), and the counter-clockwise (CCW) direction is negative (-).
• Gear A rotates in the clockwise direction: NA=+300 rpm
• Since gear A and gear B mesh externally, they rotate in opposite directions. Therefore, gear B rotates counter-clockwise (CCW).
• Gear B meshes internally with the inner surface of ring gear C. In an internal mesh, the meshing gears rotate in the same direction. Thus, ring gear C also rotates counter-clockwise (CCW).
• The outer surface of ring gear C meshes externally with gear D. Since they mesh externally, they rotate in opposite directions. Because ring gear C rotates counter-clockwise (CCW), gear D must rotate clockwise (CW).

3. Calculating the Speed Ratio Step-by-Step:
First, let's find the speed relationship between gear A and the inner surface of gear C:

NBNA = - TATB
NCNB = TBTCin
Multiplying these two ratios gives the speed of gear C relative to gear A:

NCNA = -TATB × TBTCin = - TATCin
Next, we relate the speed of gear D to the outer surface of gear C:

NDNC = - TCoutTD
Now, combining the equations to express the speed of gear D directly in terms of the speed of gear A:

ND = NA × -TATCin × -TCoutTD = NA × TATCin × TCoutTD

4. Final Calculation:
Substituting the given teeth counts and the input speed of gear A into the combined equation:

ND = 300 × 2080 × 10020
Simplifying the fractions:

ND = 300 × 0.25 × 5
ND = 300 × 1.25 = 375
Thus, the speed of gear D is 375 rpm in the clockwise direction.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: