An L-shaped member ABC with slender arms AB and BC of uniform cross-section is clamped at end A and connected to a pin at end C. The pin remains in continuous contact with and is constrained to move in a smooth horizontal slot. The section modulus of the member is same in both the arms. The end C is subjected to a horizontal force π and all the deflections are in the plane of the figure. Given the length AB is 4π and length BC is π, the magnitude and direction of the normal force on the pin from the slot, respectively, are
Solution :
Correct Answer: 3P/8, and downwards
Analysis of the Given Structure:
Based on the provided schematic diagram (Image 0 and Image 1), we have an L-shaped structural member consisting of a horizontal arm AB of length and a vertical arm BC of length . The member is fixed (clamped) at end A, and connected to a pin at end C.
The pin at C is constrained to move within a smooth horizontal slot, meaning it can translate horizontally but is prevented from translating vertically. Thus, the net vertical deflection of the pin at C must be zero:
A horizontal force is applied at end C towards the right. To maintain the vertical constraint, the slot exerts a vertical normal reaction force on the pin at C. We will determine the magnitude and direction of this normal force by applying the principle of superposition to ensure the total vertical displacement at C is zero.
Step 1: Vertical Deflection at C due to Horizontal Load P
When a horizontal force acts at C, it is transmitted through the vertical member BC to the joint B.
For the vertical member BC to remain in equilibrium:
- The force at C (acting to the right) creates a bending moment at joint B of magnitude:
This moment acts clockwise on the horizontal beam AB at end B. A clockwise moment at the free end of a cantilever beam AB causes the beam to bend upwards.
The vertical deflection at B (and consequently at C, assuming the vertical member is axially rigid) due to this end moment on a cantilever of length is:
Step 2: Vertical Deflection at C due to Normal Force F
Let be the vertical reaction force acting downwards at C to counteract the upward deflection. Since the vertical member BC is axially rigid, this vertical force is transmitted directly as a vertical point load acting downwards at the free end B of the cantilever beam AB.
The vertical deflection at B (and C) due to a downward point load at the end of the cantilever of length is:
Step 3: Compatibility Condition
For the pin to remain in the horizontal slot, the net vertical displacement must be zero:
Substituting the expressions derived in Step 1 and Step 2:
Solving for :
Since the deflection caused by the horizontal load was upwards, the resisting normal force from the slot must act in the downward direction to keep the pin in the slot.
Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.
Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.
Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.
The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.
Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.
Copyright © 2026 Combe Labs Private Limited. All Rights Reserved.