Question Details

Bars of square and circular cross-section with 0.5 m length are made of a material with shear strength of 20 MPa. The square bar cross-section dimension is 4 cm x 4 cm and the cylindrical bar cross-section diameter is 4 cm. The specimens are loaded as shown in the figure.

Which specimen(s) will fail due to the applied load as per maximum shear stress theory?

Options

A

Torsional load specimen

B

Bending load specimen

C

None of the specimens

D

Tensile and compressive load specimens

Show Answer
Correct Answer
D Tensile and compressive load specimens

Solution :

The correct option/answer is: Tensile and compressive load specimens

To determine which specimen(s) will fail, we must compute the maximum shear stress (τmax) generated in each loading condition and compare it with the allowable shear strength of the material:
τallowable=20 MPa=20 N/mm2
According to the maximum shear stress theory (Tresca's criterion), failure occurs if:
τmax>τallowable

Let's analyze the stress state for each specimen based on the dimensions and loads shown in the diagrams:

1. Tensile and Compressive Load Specimens:
Both the tensile and compressive specimens are square bars with cross-sectional dimensions of 4 cm×4 cm (or 40 mm×40 mm), subjected to an axial load of P=80 kN=80×103 N.
The axial normal stress (σ) is:
σ=PA=80×103 N40 mm×40 mm=50 N/mm2=50 MPa
For a state of uniaxial stress, the maximum in-plane shear stress is:
τmax=σ2=502=25 MPa
Since τmax=25 MPa>20 MPa, both the tensile and compressive load specimens will fail.

2. Torsional Load Specimen:
The torsional specimen is a cylindrical bar with a diameter of d=4 cm=40 mm, subjected to a torque of T=64π N⋅m=64π×103 N⋅mm.
The maximum torsional shear stress (τmax) at the outer fiber of the shaft is given by:
τmax=16Tπd3=16×64π×103π×403=1,024,00064,000=16 N/mm2=16 MPa
Since τmax=16 MPa<20 MPa, the torsional load specimen will not fail.

3. Bending Load Specimen:
The bending load specimen experiences a bending moment of M=320 N⋅m=320×103 N⋅mm.
Using the square cross-section configuration (side a=40 mm) as analyzed in the solution sheet:
The maximum bending stress (σ) is:
σ=Ma3/6=320×103 N⋅mm403/6 mm3=30 N/mm2=30 MPa
The corresponding maximum shear stress is:
τmax=σ2=302=15 N/mm2=15 MPa
Since τmax=15 MPa<20 MPa, the bending load specimen will not fail.

Conclusion:
Only the tensile and compressive load specimens exhibit a maximum shear stress (25 MPa) that exceeds the material's shear strength (20 MPa), meaning they are the only specimens that will fail.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: