Question Details

Consider an isentropic flow of air (ratio of specific heats = 1.4) through a duct as shown in the figure.


The variations in the flow across the cross-section are negligible. The flow conditions at Location 1 are given as follows:

                                                  𝑃1 = 100 kPa, 𝜌1 = 1.2 kg/m3 , 𝑒1= 400 m/s


The duct cross-sectional area at Location 2 is given by A2 = 2A1, where A1 denotes the duct cross-sectional area at Location 1. Which one of the given statements about the velocity 𝑒2 and pressure 𝑃2 at Location 2 is TRUE?



Options

A

𝑒2 < 𝑒1 , 𝑃2 < 𝑃1

B

𝑒2 < 𝑒1 , 𝑃2 > 𝑃1

C

𝑒2 > 𝑒1 , 𝑃2 < 𝑃1

D

𝑒2 > 𝑒1 , 𝑃2 > P1

Show Answer
Correct Answer

Solution :

The correct option is:
𝑒2 > 𝑒1 , 𝑃2 < 𝑃1

Step-by-Step Explanation:

1. Analysis of the Duct Geometry
From the schematic diagram provided in the image, we can observe that the duct has a diverging profile from Location 1 to Location 2. The cross-sectional areas at these locations are labeled as A1 and A2 respectively. We are given:
A2=2A1
Since A2>A1, the cross-sectional area of the duct increases in the flow direction, confirming it is a diverging duct.

2. Determining the Inlet Mach Number (Location 1)
To understand how the flow behaves in a diverging duct, we must first determine if the incoming flow is subsonic (M<1) or supersonic (M>1).
We are given the following properties of air at Location 1:
• Pressure, P1 = 100 kPa = 100 × 103 Pa
• Density, ρ1 = 1.2 kg/m3
• Velocity, u1 = 400 m/s
• Ratio of specific heats, γ = 1.4
• Gas constant for air, R = 287 J/(kg·K)

We first find the temperature T1 at Location 1 using the ideal gas equation:
P1=ρ1RT1
Rearranging for T1:
T1=P1ρ1R
Substituting the given values:
T1=100×1031.2×287≈290.36 K

Next, we calculate the local speed of sound c1 at Location 1:
c1=γRT1
Substituting the values:
c1=1.4×287×290.36≈341.56 m/s

Now, we find the Mach number M1 at Location 1:
M1=u1c1
Substituting the velocity and speed of sound:
M1=400341.56≈1.171
Since M1>1, the flow entering the duct is supersonic.

3. Flow Behavior in the Diverging Duct
For isentropic, compressible flow, the relation between cross-sectional area changes and velocity changes is given by the area-velocity relation:
dAA=(M2-1)duu
Let us analyze this equation for our conditions:
• Since the duct is diverging, area increases: dA>0.
• Since the flow is supersonic, M>1, which means (M2-1)>0.

To satisfy the area-velocity relation under these conditions, the change in velocity must also be positive:
du>0
Therefore, the velocity increases as the flow moves from Location 1 to Location 2, meaning:
𝑒2 > 𝑒1

4. Pressure Variation
For isentropic flow, Euler's momentum equation describes the relation between pressure changes and velocity changes:
dP=-ρudu
Since density ρ, velocity u, and velocity change du are all positive, the change in pressure must be negative:
dP<0
This means pressure decreases as the flow expands and accelerates, resulting in:
𝑃2 < 𝑃1

Conclusion:
In supersonic flow through a diverging duct, the flow continues to expand and accelerate, yielding:
𝑒2 > 𝑒1 and 𝑃2 < 𝑃1

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: