Question Details

Consider sand casting of a cube of edge length a. A cylindrical riser is placed at the top of the casting. Assume solidification time, 𝑑s ∝ 𝑉⁄𝐴 , where V is the volume and A is the total surface area dissipating heat. If the top of the riser is insulated, which of the following radius/radii of riser is/are acceptable?

Options

A

a/3

B

a/2

C

a/4

D

a/6

Show Answer
Correct Answer

Solution :

The correct answer is a/2.

For a riser to be design-wise acceptable, its solidification time must be greater than or equal to the solidification time of the casting to ensure it feeds molten metal to the casting as it shrinks.
According to the given solidification time relation:

t s ∝ V A

The ratio M=VA is defined as the modulus. Therefore, for an acceptable riser design:

M riser ≥ M casting

1. Modulus of the Riser (Mriser):
Let the cylindrical riser have a radius r and height h.
The volume of the riser is:

V r = π r 2 h

Since the top of the riser is insulated and the bottom is in contact with the casting, heat is dissipated only through the curved lateral surface area:

A r = 2 π r h

Thus, the modulus of the riser is:

M r = V r A r = π r 2 h 2 π r h = r 2

2. Modulus of the Casting (Mcasting):
The casting is a cube of edge length a.
The volume of the casting is:

V c = a 3

The total surface area of a standalone cube is 6a2. However, the contact area between the riser and the top surface of the casting (which is a circle of area πr2) does not dissipate heat to the mold. Therefore, the heat-dissipating surface area of the casting is:

A c = 6 a 2 - π r 2

Thus, the modulus of the casting is:

M c = a 3 6 a 2 - π r 2

3. Evaluation of Design Condition:
Setting up the inequality:

r 2 ≥ a 3 6 a 2 - π r 2

Multiplying both sides by the denominator:

6 a 2 r - π r 3 ≥ 2 a 3

Let us evaluate this condition for the given options:

• For r = a/3:
LHS = 6a2(a3)-π(a3)3=2a3-π27a3≈2a3-0.116a3=1.884a3, which is less than 2a3. Thus, a/3 is not acceptable.

• For r = a/2:
LHS = 6a2(a2)-π(a2)3=3a3-π8a3≈3a3-0.393a3=2.607a3, which is greater than 2a3. Thus, a/2 is acceptable.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: