Consider the mechanism shown in the figure. There is rolling contact without slip between the disc and ground.
Select the correct statement about instantaneous centers in the mechanism.
Solution :
The correct option is: All points P, Q, R, S, T and U are instantaneous centers of mechanism
1. Identification of Links and Joint Locations:
From the given mechanism diagram, we can identify four distinct links:
• Link 1: The ground/frame (represented by the horizontal dash-dot line passing through pivot P and the hatched ground surface).
• Link 2: The crank link pivoted to the ground at point P.
• Link 3: The connecting rod joining point Q and the center of the disc at point S.
• Link 4: The circular disc of radius ST rolling on the ground.
2. Calculating the Total Number of Instantaneous Centers:
For a planar mechanism with N links, the total number of instantaneous centers () is given by the formula:
Substituting into the formula:
Thus, there are exactly 6 instantaneous centers for this mechanism: , , , , , and .
3. Determining the Location of Each Instantaneous Center:
We can locate all 6 instantaneous centers using direct observation and the Aronhold-Kennedy Theorem of Three Centers (which states that if three links move relatively to each other, their three relative instantaneous centers must lie on a straight line):
• Center (Point P): This is the permanent pin joint connecting the crank (Link 2) to the fixed ground (Link 1). Therefore, point P is the instantaneous center .
• Center (Point Q): This is the pin joint connecting the crank (Link 2) and the connecting rod (Link 3). Therefore, point Q is the instantaneous center .
• Center (Point S): This is the pin joint connecting the connecting rod (Link 3) to the center of the disc (Link 4). Therefore, point S is the instantaneous center .
• Center (Point T): Since the disc (Link 4) rolls without slipping on the ground (Link 1), the point of contact T has zero instantaneous velocity relative to the ground. Thus, point T is the instantaneous center .
• Center (Point U): According to Kennedy's Theorem, the three centers , , and must lie on a straight line (line PQ). Similarly, the three centers , , and must lie on a straight line (vertical line TS through the disc's center). The intersection of the extension of line PQ and the vertical line TS locates the instantaneous center , which is labeled as point U.
• Center (Point R): By Kennedy's Theorem, the three centers , , and must lie on a straight line (the horizontal line of centers/ground line PT). Additionally, the three centers , , and must lie on a straight line (line QS along Link 3). The intersection of the horizontal line PT and the link axis line QS defines the instantaneous center , which is labeled as point R.
Conclusion:
Since all six points P, Q, R, S, T, and U correspond exactly to the six instantaneous centers of this four-link mechanism, all of these points are instantaneous centers.
Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.
Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.
Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.
The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.
Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.
Copyright © 2026 Combe Labs Private Limited. All Rights Reserved.