Question Details

Consider two concentric circular cylinders of different materials M and N in contact with each other at r = b, as shown below. The interface at r = b is frictionless. The composite cylinder system is subjected to internal pressure P. Let (urM ,uθM)  and (σrrM σθθM) denote the radial and tangential displacement and stress components, respectively, in material M. Similarly, (urN ,uθN)  and (σrrN σθθN)  denote the radial and tangential displacement and stress components, respectively, in material N. The boundary conditions that need to be satisfied at the frictionless interface between the two cylinders are :

Options

A

urM = urN   and σrrM= σrrN  and uθM = uθN  and  σθθM = σθθN

B

σrrM= σrrN and σθθM= σθθN only

C

uθM = uθN and σθθM = σθθN only

D

urM = urN and σrrM= σrrN only

Show Answer
Correct Answer

Solution :

The correct answer is:
urM = urN and σrrM = σrrN only

Problem Analysis:
As shown in the provided schematic image, the composite system consists of two concentric cylinders made of different materials, M (inner cylinder) and N (outer cylinder), which are in contact at the interface radius:

r = b

The system is subjected to an internal pressure P. We are tasked with identifying the boundary conditions that must hold at this interface. Let's analyze each condition step-by-step based on mechanical principles:

1. Continuity of Radial Displacement (Kinematic Boundary Condition):
Since the two cylinders remain in contact during deformation without separation or interpenetration at the interface, the radial displacement of the outer boundary of cylinder M must equal the radial displacement of the inner boundary of cylinder N at the contact radius:

u r M = u r N  at  r = b

2. Continuity of Radial Stress (Static Boundary Condition):
For static equilibrium at the contact surface, the action and reaction forces in the radial direction must be equal and opposite. This requires that the normal stress (radial stress) be continuous across the interface:

σ r r M = σ r r N  at  r = b

3. Impact of the Frictionless Interface:
The problem states that the interface at r=b is frictionless.
- A frictionless interface cannot transmit shear stresses. Therefore, the shear stresses on both sides must vanish:

σ r θ M = σ r θ N = 0

- Because the interface is frictionless, the two cylinders are free to slide relative to one another in the circumferential (tangential) direction. Consequently, their tangential displacements do not have to be equal:

u θ M ≠ u θ N

- Furthermore, since cylinders M and N are made of different materials with different elastic properties (such as Young's modulus and Poisson's ratio), their circumferential expansion under radial loading differs, meaning the tangential (hoop) stresses are discontinuous across the interface:

σ θ θ M ≠ σ θ θ N

Conclusion:
Thus, the only conditions that must be satisfied at the frictionless interface at r=b are:

u r M = u r N  and  σ r r M = σ r r N  only

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: