Question Details

In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and tangential cutting forces were measured as 1259 N and 1601 N, respectively. The measured chip thickness after machining was found to be 0.3 mm. The rake angle was 10° and axial feed was 100 mm/min. The rotational speed of the spindle was 1000 rpm. Assuming the material to be perfectly plastic and Merchant’s first solution, the shear strength of the material is closest to

Options

A

875 MPa

B

920 MPa

C

722 MPa

D

200 MPa

Show Answer
Correct Answer

Solution :

The correct answer is 722 MPa.

Step-by-Step Explanation:

1. Identify the given parameters from the problem and the provided analysis diagram:
Axial force, Fx=1259 N
Tangential cutting force, Fz=1601 N
Measured chip thickness after machining, tc=0.3 mm
Rake angle, α=10°
Axial feed rate, fN=100 mm/min
Rotational speed of the spindle, N=1000 rpm
Wall thickness of the cylindrical tube (depth of cut), d=5 mm
For orthogonal turning, the principal tool approach angle is λ=90°.

2. Determine the cutting force (Fc) and feed force (Ft):
The cutting force is equal to the tangential force:

Fc=Fz=1601 N

The feed force is related to the axial force by:

Ft=Fxsinλ=1259sin90°=1259 N

3. Calculate the feed per revolution (f) and uncut chip thickness (t):
The feed per revolution is calculated from the feed rate and spindle speed:

f=100 mm/min1000 rpm=0.1 mm/rev

The uncut chip thickness (t) is given by:

t=fsinλ=0.1×sin90°=0.1 mm

The width of the cut (b) is:

b=dsinλ=5sin90°=5 mm

4. Calculate the chip thickness ratio (r) and the shear angle (ϕ):
The chip thickness ratio is:

r=ttc=0.10.3=0.33

The shear angle is computed using the relation:

tanϕ=rcosα1-rsinα

Substituting the values:

tanϕ=0.33×cos10°1-0.33×sin10°=0.33×0.98481-0.33×0.1736=0.32500.9427=0.3447

Taking the arctangent:

ϕ=tan-1(0.3447)≈19.02°

5. Calculate the shear strength (τs) of the material:
The shear force (Fs) acting along the shear plane is given by Merchant's circle relations:

Fs=Fccosϕ-Ftsinϕ

The shear plane area (As) is given by:

As=btsinϕ

Thus, the shear strength (τs) is:

τs=FsAs=(Fccosϕ-Ftsinϕ)sinϕbt

Substituting the numerical values:

τs=(1601×cos19.02°-1259×sin19.02°)sin19.02°5×0.1

τs=(1601×0.9454-1259×0.3259)×0.32590.5

τs=(1513.58-410.31)×0.32590.5

τs=1103.27×0.32590.5≈719.12 MPa

This value is closest to 722 MPa.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: