Question Details

Match the following.

Heat treatment

Effect

P:

Tempering

1.

Strengthening

Q:

Quenching

2.

Toughening

R:

Annealing

3.

Hardening

S:

Normalizing

4.

Softening

Options

A

P-2, Q-3, R-4, S-1

B

P-1, Q-1, R-3, S-2

C

P-3, Q-3, R-1, S-3

D

P-4, Q-3, R-2, S-1

Show Answer
Correct Answer

Solution :

The correct option is P-2, Q-3, R-4, S-1.

As illustrated in the provided diagram, the general heat treatment process involves a sequence of Heating a Material and then subjecting it to controlled Cooling. This sequence alters the microstructure of the substance to yield a "Stress-free and refined material with better properties." Depending on the heating temperature, soaking time, and the rate of cooling, different heat treatment techniques are utilized to achieve specific material effects. Let's break down each heat treatment method and its primary effect:

1. Tempering (P → 2: Toughening):
Tempering is performed on metals (typically steel) that have already been hardened by quenching. Quenched steel is extremely hard but also highly brittle and prone to cracking under stress. By heating the hardened steel to a temperature below its critical point and cooling it, tempering reduces brittleness and internal stresses while increasing ductility and toughness. Therefore, the primary effect of tempering is toughening.

2. Quenching (Q → 3: Hardening):
Quenching is the process of heating a metal to an elevated temperature (above its critical temperature range) and then cooling it very rapidly, usually by immersing it in a medium such as water, oil, or brine. This rapid cooling prevents the formation of softer microstructures and promotes the formation of a very hard, needle-like phase called martensite. Consequently, the primary effect of quenching is hardening.

3. Annealing (R → 4: Softening):
Annealing involves heating the material to a high temperature, holding it at that temperature to allow recrystallization, and then cooling it very slowly (typically inside the furnace itself). This slow cooling rate allows the material to reach a stable, stress-free crystalline structure. Annealing relieves internal residual stresses, increases ductility, refines grain structures, and makes the metal much easier to machine or cold-work. Thus, the primary effect of annealing is softening.

4. Normalizing (S → 1: Strengthening):
Normalizing is similar to annealing, but the heated metal is cooled in still air at room temperature rather than slowly inside a furnace. Because the cooling rate in air is faster than furnace cooling, it produces a finer, more uniform grain structure with higher tensile strength and yield strength compared to annealed steel. This results in the strengthening of the material.

By matching each heat treatment to its corresponding effect, we get:
• P (Tempering) → 2 (Toughening)
• Q (Quenching) → 3 (Hardening)
• R (Annealing) → 4 (Softening)
• S (Normalizing) → 1 (Strengthening)

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: