Question Details

Shear stress distribution on the cross-section of the coil wire in a helical compression spring is shown in the figure. This shear stress distribution represents

Options

A

direct shear stress in the coil wire cross-section

B

torsional shear stress in the coil wire cross-section

C

combined direct shear and torsional shear stress in the coil wire cross-section

D

combined direct shear and torsional shear stress along with the effect of stress concentration at inside edge of the coil wire cross-section

Show Answer
Correct Answer
D combined direct shear and torsional shear stress along with the effect of stress concentration at inside edge of the coil wire cross-section

Solution :

The correct answer is: combined direct shear and torsional shear stress along with the effect of stress concentration at inside edge of the coil wire cross-section

Analysis of the Image:
The provided image displays a circular cross-section of a helical spring wire with a horizontal reference line and a vertical centerline. A series of vertical arrows represents the magnitude and direction of the shear stress across the diameter of the wire:
1. On the left side (representing the inner edge of the coil), the arrows point upwards, showing a much larger magnitude of shear stress.
2. On the right side (representing the outer edge of the coil), the arrows point downwards with a smaller magnitude.
3. The envelope of these stress vectors forms a straight, inclined line that does not pass through the center of the cross-section, showing a non-symmetric stress distribution that is shifted upward on the left side.

Step-by-Step Explanation:

When a helical compression spring is subjected to an axial load, the wire experiences a combination of three distinct stress components: torsional shear stress, direct shear stress, and shear stress concentration due to wire curvature.

1. Torsional Shear Stress (τt):
The axial force acting at the spring radius creates a twisting moment (torque) on the wire. The resulting torsional shear stress is zero at the center of the wire and varies linearly to a maximum value at the outer boundary of the wire:

τ t = 16 T π d 3

On one side of the vertical axis (inner side), this stress acts in the upward direction, while on the opposite side (outer side), it acts in the downward direction.

2. Direct Shear Stress (τd):
The axial load also causes a direct transverse shear force on the wire cross-section. This direct shear stress is assumed to be uniformly distributed across the entire cross-section of the wire and acts in the direction of the load (e.g., upwards):

τ d = F A = 4 F π d 2

3. Combined Stress State:
By superimposing the torsional shear stress and the direct shear stress:
- At the inside fiber (left side), the direct shear stress adds to the torsional shear stress:
τ inner = τ t + τ d
- At the outside fiber (right side), the direct shear stress opposes the torsional shear stress:
τ outer = τ t - τ d
This combination shifts the neutral axis away from the geometric center and produces the linear, offset distribution shown in the diagram.

4. Curvature Effect and Stress Concentration:
In actual helical springs, because the wire is curved into a coil, the length of the fiber on the inner side of the coil is shorter than the fiber on the outer side. This curvature creates an additional stress concentration at the inside edge of the coil wire. To design safely against failure, this stress concentration must be accounted for (commonly using the Wahl stress correction factor, K). Therefore, the overall shear stress distribution represents the combined direct shear and torsional shear stress along with the effect of stress concentration at the inside edge of the coil wire cross-section.

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: