Question Details

Two rollers of diameters D1 (in mm) and D2 (in mm) are used to measure the internal taper angle in the V-groove of a machined component. The heights H1 (in mm) and H2 (in mm) are measured by using a height gauge after inserting the rollers into the same V-groove as shown in the figure.

Which one of the following is the correct relationship to evaluate the angle α as shown in the figure?

Options

A

sin ⁡ α = ( D 1 − D 2 ) 2 ( H 1 − H 2 ) − ( D 1 − D 2 )

B

cos ⁡ α = ( D 1 − D 2 ) 2 ( H 1 − H 2 ) − 2 ( D 1 − D 2 )

C

c o s e c α = ( H 1 − H 2 ) − ( D 1 − D 2 ) 2 ( D 1 − D 2 )

D

sin ⁡ α = ( H 1 − H 2 ) ( D 1 − D 2 )

Show Answer
Correct Answer
A
sin ⁡ α = ( D 1 − D 2 ) 2 ( H 1 − H 2 ) − ( D 1 − D 2 )

Solution :

The correct relationship to evaluate the taper angle α is:

sin ⁡ α = ( D 1 − D 2 ) 2 ( H 1 − H 2 ) − ( D 1 − D 2 )

Step-by-Step Derivation:

1. Identify the key elements from the visual diagram:
- We are given two rollers of diameters D1 and D2 (with D1 > D2) inserted in the same V-groove.
- The top-most heights of the rollers measured from a common base reference using a height gauge are H1 and H2 respectively.
- Let the center of the larger roller be point O and the center of the smaller roller be point B.

2. Express the positions of the roller centers along the central axis of symmetry:
- The vertical height from the reference plane to the center O of the larger roller is:
H O = H 1 − D 1 2
- The vertical height from the reference plane to the center B of the smaller roller is:
H B = H 2 − D 2 2

3. Calculate the distance OB between the two centers along the central line:
O B = H O − H B = ( H 1 − D 1 2 ) − ( H 2 − D 2 2 )
Rearranging the terms:
O B = ( H 1 − H 2 ) − ( D 1 − D 2 ) 2

4. Define a right-angled triangle OAB:
- Draw a line from B perpendicular to the tangent line of the larger roller at point A, parallel to the side flank of the V-groove.
- The length OA represents the difference in the radii of the two rollers:
O A = R 1 − R 2 = D 1 − D 2 2

5. Relate the geometry to the taper angle α:
- In the right-angled triangle OAB, the angle ∠OBA is equal to the internal taper semi-angle α.
- Applying the trigonometric definition of sine:
sin ⁡ α = O A O B

6. Substitute the derived values of OA and OB into the sine formula:
sin ⁡ α = D 1 − D 2 2 ( H 1 − H 2 ) − D 1 − D 2 2

7. Multiply both the numerator and the denominator by 2 to clear the fractions:
sin ⁡ α = ( D 1 − D 2 ) 2 ( H 1 − H 2 ) − ( D 1 − D 2 )

Transparent Access on Mindyard

Built for Learners & Educators Alike

Completely free for students. Educators & coaching institutes get 2 months free Pro trial to create tests.

FREE FOR STUDENTS

Practice & Learn Free for Students

Access unlimited practice questions, detailed step-by-step solutions, and exam study materials — completely free for students.

  • Unlimited mock tests & question bank practice
  • Full access to curated study library & formula notes
  • 100% free for students • No credit card required
2 MONTHS FREE TRIAL

Educators & Coaching Institutes

Create and conduct professional online assessments with AI question generation, tab proctoring, and comprehensive batch management.

  • AI question uploader & rapid test generator
  • Anti-cheating tab proctoring & performance reports
  • Full Pro access free for 60 days • No upfront commitment
Discover more resources

You may also like

Mock Tests

View All
  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

The GATE 2026 Mechanical Engineering (ME) examination scheduled for 14 February 2026 is one of the most important national-level competitive exams for engineering graduates aspiring for higher education and prestigious career opportunities in PSU and research organizations. Conducted annually at the national level, the GATE Mechanical Engineering paper evaluates candidates on core subjects such as Engineering Mechanics, Thermodynamics, Fluid Mechanics, Strength of Materials, Manufacturing Processes, and Machine Design, along with General Aptitude and Engineering Mathematics. This examination is a gateway for admission into M.Tech/Ph.D. programs at IITs, NITs, IISc, and other top institutions, as well as recruitment in major Public Sector Undertakings (PSUs) like ONGC, NTPC, BHEL, IOCL, and more. The GATE ME 2026 paper will test conceptual understanding, analytical thinking, and problem-solving ability, making strong preparation essential for success. Candidates are advised to practice previous year papers, mock tests, and focus on conceptual clarity for high scoring performance. This exam on 14/02/2026 is a crucial opportunity for mechanical engineering aspirants to secure their future in academia and industry.

  • GATE
  • intermediate
  • 3 hours
  • mechanical engineering

Strengthen your preparation with this GATE 2025 Mechanical Engineering (ME) test, covering core subjects such as thermodynamics, fluid mechanics, strength of materials, theory of machines, and manufacturing engineering. With a well-balanced mix of conceptual and numerical questions, this test helps enhance problem-solving ability and technical understanding. Aligned with the latest exam pattern, it is ideal for improving accuracy, speed, and overall exam readiness.

Ask AI Tutor
5 left
Q1 View Question & Options
AI Tutor is solving this question...
Reading question context & options...
Ask your own doubt or choose a quick prompt: